Home › Vehicle Interior › WIPER / WASHER › WIPER SWITCH
RM27M0U _58 Vehicle Interior _049134 WIPER / WASHER _0234268 WIPER SWITCH A

WIPER / WASHER  WIPER SWITCH  INSTALLATION  


PROCEDURE

Hide 84650 1.INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY

a.
E146421

Attach the claw to install the wiper switch.


b.

Connect the 2 connectors.


Hide 45286B 2.INSTALL UPPER STEERING COLUMN COVER

a.
E146420

Attach the 4 clips to install the upper steering column cover onto the instrument panel cluster finish panel.


b.

Attach the claw to install the upper steering column cover.


Hide 45287 3.INSTALL LOWER STEERING COLUMN COVER

a.
E146419

Attach the 2 claws to install the lower steering column cover.

NOTICE:

Do not damage the tilt and telescopic switch.



b.

Using a screwdriver, while turning the steering wheel to the right and left, install the 2 screws and lower steering column cover.