Home › Vehicle Interior › WIPER / WASHER › WIPER SWITCH
RM27M0U _58 Vehicle Interior _049134 WIPER / WASHER _0234268 WIPER SWITCH A

WIPER / WASHER  WIPER SWITCH  REMOVAL  


PROCEDURE

Hide 45287 1.REMOVE LOWER STEERING COLUMN COVER

a.

for Manual Tilt and Telescopic:

i.

Operate the tilt and telescopic lever to fully extend and lower the steering column.



b.

for Power Tilt and Telescopic:

i.

Turn the ignition switch ON. Operate the tilt and telescopic switch to fully extend and lower the steering column.



c.
E146419

While turning the steering wheel to the right and left, remove the 2 screws and lower steering column cover.


d.

Detach the 2 claws to remove the lower steering column cover.

NOTICE:

Do not damage the tilt and telescopic switch.



Hide 45286B 2.REMOVE UPPER STEERING COLUMN COVER

a.
E146420

Detach the 4 clips.


b.

Detach the claw to remove the upper steering column cover.


Hide 84650 3.REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY

a.
E146421

Disconnect the 2 connectors.


b.

Detach the claw and remove the wiper switch.

NOTICE:

Do not push the claw with excessive force as it may brake.