86160B
1.INSPECT REAR NO. 1 SPEAKER ASSEMBLY (for Standard)
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 1 - 2 | Always | 3.2 to 4.8 Ω |
If the result is not as specified, replace the rear No. 1 speaker assembly.
| *a | Component without harness connected
(Rear No. 1 Speaker Assembly) |
86160B
2.INSPECT REAR NO. 1 SPEAKER ASSEMBLY (for 7 Speakers)
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 1 - 2 | Always | 2 Ω |
If the result is not as specified, replace the rear No. 1 speaker assembly.
| *a | Component without harness connected
(Rear No. 1 Speaker Assembly) |