Home › Audio / Visual / Telematics › AUDIO / VIDEO › INSTRUMENT PANEL SPEAKER(for Double Cab)
RM27M0U _56 Audio / Visual / Telematics _049135 AUDIO / VIDEO _0234283 INSTRUMENT PANEL SPEAKER(for Double Cab) G

AUDIO / VIDEO  INSTRUMENT PANEL SPEAKER(for Double Cab)  INSPECTION  


PROCEDURE

Hide 86160P 1.INSPECT FRONT NO. 2 SPEAKER ASSEMBLY

a.

When there is a malfunction such as noise from a speaker or no sound at all, replace the speaker with a new one and check that the malfunction disappears.

OK:

Malfunction disappears.


HINT:
·

Connect the connectors to the front No. 2 speaker assemblies.

·

When there is a possibility that either the right or left front No. 2 speaker assembly is defective, inspect by interchanging the right one with the left one.

·

Perform the inspection above on both the LH and RH sides.




Hide 86160R 2.INSPECT FRONT NO. 4 SPEAKER ASSEMBLY (for 7 Speakers)

a.

Temporarily replace the front No. 4 speaker assembly with a new or normally functioning one.

OK:

Malfunction disappears.


HINT:

Connect the connectors to the front No. 4 speaker assembly.