Home › Audio / Visual / Telematics › AUDIO / VIDEO › REAR DOOR SPEAKER(for CrewMax)
RM27M0U _56 Audio / Visual / Telematics _049135 AUDIO / VIDEO _0234287 REAR DOOR SPEAKER(for CrewMax) G

AUDIO / VIDEO  REAR DOOR SPEAKER(for CrewMax)  INSPECTION  


PROCEDURE

Hide 86160B 1.INSPECT REAR NO. 1 SPEAKER ASSEMBLY (for Standard)

E144966E48
0.062,0.047 0.266,0.210 0.204,0.163 10 *a

a.

Measure the resistance according to the value(s) in the table below.

Standard resistance:
Tester Connection Condition Specified Condition
1 - 2 Always 2 Ω


If the result is not as specified, replace the rear No. 1 speaker assembly.

Text in Illustration
*a Component without harness connected
(Rear No. 1 Speaker Assembly)


Hide 86160B 2.INSPECT REAR NO. 1 SPEAKER ASSEMBLY (for 12 Speakers)

E144966E48
0.062,0.047 0.266,0.210 0.204,0.163 10 *a

a.

Measure the resistance according to the value(s) in the table below.

Standard resistance:
Tester Connection Condition Specified Condition
1 - 2 Always 1.8 to 2.6 Ω


If the result is not as specified, replace the rear No. 1 speaker assembly.

Text in Illustration
*a Component without harness connected
(Rear No. 1 Speaker Assembly)


Hide 86160Y 3.INSPECT REAR NO. 2 SPEAKER ASSEMBLY

a.

When there is a malfunction such as noise from a speaker or no sound at all, replace the speaker with a new one and check that the malfunction disappears.

OK:

Malfunction disappears.


HINT:
·

Connect the connectors to the rear No. 2 speaker assemblies.

·

When there is a possibility that either the right or left rear No. 2 speaker assembly is defective, inspect by interchanging the right one with the left one.

·

Perform the inspection above on both the LH and RH sides.