84927
1.INSPECT SEAT MEMORY SWITCH
Check the resistance of the seat memory switch.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Switch Condition | Specified Condition |
|---|---|---|
| 2 (M1) - 4 (E) | Switch 1 pressed | Below 1 Ω |
| 3 (M2) - 4 (E) | Switch 2 pressed | |
| 1 (MRY) - 4 (E) | SET switch pressed |
If the result is not as specified, replace the seat memory switch.
| *a | Component without wire harness connected
(Seat Memory Switch) |