Home › Vehicle Interior › SEAT › FRONT POWER SEAT MOTOR ASSEMBLY
RM27M0U _58 Vehicle Interior _049136 SEAT _0234303 FRONT POWER SEAT MOTOR ASSEMBLY G

SEAT  FRONT POWER SEAT MOTOR ASSEMBLY  INSPECTION  


PROCEDURE

Hide 71014S 1.INSPECT FRONT SEATBACK FRAME SUB-ASSEMBLY LH (w/o Seat Position Memory System)

a.
B356566E01
0.295,0.224 0.479,0.398 0.184,0.174 10 *a 0.295,1.484 0.479,1.658 0.184,0.174 10 *1 1.727,1.484 1.911,1.658 0.184,0.174 10 *2 0.851,1.581 0.484,1.581 false 1.716,1.581 1.349,1.581 false

Check the operation of the reclining motor LH.

i.

Apply battery voltage to the reclining motor LH connector, and check that the reclining motor LH operates smoothly as follows.

OK:
Condition Switch Condition
Battery positive (+) → Terminal 2
Battery negative (-) → Terminal 1
Forward
Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 2
Backward


If the result is not as specified, replace the front seatback frame sub-assembly LH.

Text in Illustration
*1 Terminal 1
*2 Terminal 2
*a Component without wire harness connected
(Front Seatback Frame Sub-assembly LH (Reclining Motor LH))



Hide 71014S 2.INSPECT FRONT SEATBACK FRAME SUB-ASSEMBLY LH (w/ Seat Position Memory System)

a.
B356565E01
0.295,0.224 0.479,0.398 0.184,0.174 10 *a 0.295,1.484 0.479,1.658 0.184,0.174 10 *1 1.727,1.484 1.911,1.658 0.184,0.174 10 *2 0.851,1.581 0.484,1.581 false 1.716,1.581 1.349,1.581 false

Check the operation of the reclining motor LH.

i.

Apply battery voltage to the reclining motor LH connector, and check that the reclining motor LH operates smoothly as follows.

OK:
Condition Switch Condition
Battery positive (+) → Terminal 2
Battery negative (-) → Terminal 1
Forward
Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 2
Backward


If the result is not as specified, replace the front seatback frame sub-assembly LH.

Text in Illustration
*1 Terminal 1
*2 Terminal 2
*a Component without wire harness connected
(Front Seatback Frame Sub-assembly LH (Reclining Motor LH))



Hide 71120B 3.INSPECT FRONT SEAT CUSHION FRAME SUB-ASSEMBLY LH (w/o Seat Position Memory System)

a.

Check the operation of the slide motor LH.

i.
B353918E01
0.501,0.246 0.694,0.439 0.193,0.193 10 *a

Apply battery voltage to the slide motor LH connector, and check that the slide motor LH operates smoothly as follows.

OK:
Condition Switch Condition
Battery positive (+) → Terminal 4
Battery negative (-) → Terminal 3
Forward
Battery positive (+) → Terminal 3
Battery negative (-) → Terminal 4
Backward


If the result is not as specified, replace the front seat cushion frame sub-assembly LH.

Text in Illustration
*a Component without wire harness connected
(Front Seat Cushion Frame Sub-assembly LH (Slide Motor LH))



b.

Check the operation of the front vertical motor LH.

i.
B356566E01
0.295,0.224 0.479,0.398 0.184,0.174 10 *a 0.295,1.484 0.479,1.658 0.184,0.174 10 *1 1.727,1.484 1.911,1.658 0.184,0.174 10 *2 0.851,1.581 0.484,1.581 false 1.716,1.581 1.349,1.581 false

Apply battery voltage to the front vertical motor LH connector, and check that the front vertical motor LH operates smoothly as follows.

OK:
Condition Switch Condition
Battery positive (+) → Terminal 2
Battery negative (-) → Terminal 1
Upward
Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 2
Downward


If the result is not as specified, replace the front seat cushion frame sub-assembly LH.

Text in Illustration
*1 Terminal 1
*2 Terminal 2
*a Component without wire harness connected
(Front Seat Cushion Frame Sub-assembly LH (Front Vertical Motor LH))



c.

Check the operation of the lifter motor LH.

i.
B333312E01
0.603,0.199 0.782,0.369 0.179,0.170 10 *a

Apply battery voltage to the lifter motor LH connector, and check that the lifter motor LH operates smoothly as follows.

OK:
Condition Switch Condition
Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 2
Upward
Battery positive (+) → Terminal 2
Battery negative (-) → Terminal 1
Downward


If the result is not as specified, replace the front seat cushion frame sub-assembly LH.

Text in Illustration
*a Component without wire harness connected
(Front Seat Cushion Frame Sub-assembly LH (Lifter Motor LH))



Hide 71120B 4.INSPECT FRONT SEAT CUSHION FRAME SUB-ASSEMBLY LH (w/ Seat Position Memory System)

a.

Check the operation of the slide motor LH.

i.
B353918E01
0.501,0.246 0.694,0.439 0.193,0.193 10 *a

Apply battery voltage to the slide motor LH connector, and check that the slide motor LH operates smoothly as follows.

OK:
Condition Switch Condition
Battery positive (+) → Terminal 4
Battery negative (-) → Terminal 3
Forward
Battery positive (+) → Terminal 3
Battery negative (-) → Terminal 4
Backward


If the result is not as specified, replace the front seat cushion frame sub-assembly LH.

Text in Illustration
*a Component without wire harness connected
(Front Seat Cushion Frame Sub-assembly LH (Slide Motor LH))



b.

Check the operation of the front vertical motor LH.

i.
B356565E01
0.295,0.224 0.479,0.398 0.184,0.174 10 *a 0.295,1.484 0.479,1.658 0.184,0.174 10 *1 1.727,1.484 1.911,1.658 0.184,0.174 10 *2 0.851,1.581 0.484,1.581 false 1.716,1.581 1.349,1.581 false

Apply battery voltage to the front vertical motor LH connector, and check that the front vertical motor LH operates smoothly as follows.

OK:
Condition Switch Condition
Battery positive (+) → Terminal 2
Battery negative (-) → Terminal 1
Upward
Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 2
Downward


If the result is not as specified, replace the front seat cushion frame sub-assembly LH.

Text in Illustration
*1 Terminal 1
*2 Terminal 2
*a Component without wire harness connected
(Front Seat Cushion Frame Sub-assembly LH (Front Vertical Motor LH))



c.

Check the operation of the lifter motor LH.

i.
B333312E01
0.603,0.199 0.782,0.369 0.179,0.170 10 *a

Apply battery voltage to the lifter motor LH connector, and check that the lifter motor LH operates smoothly as follows.

OK:
Condition Switch Condition
Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 2
Upward
Battery positive (+) → Terminal 2
Battery negative (-) → Terminal 1
Downward


If the result is not as specified, replace the front seat cushion frame sub-assembly LH.

Text in Illustration
*a Component without wire harness connected
(Front Seat Cushion Frame Sub-assembly LH (Lifter Motor LH))



Hide 71703C 5.INSPECT FRONT SEAT CUSHION PANEL SUB-ASSEMBLY (w/ Leg Support Adjustment Switch)

a.
B333312E01
0.603,0.199 0.782,0.369 0.179,0.170 10 *a

Check the operation of the leg support adjustment motor.

i.

Apply battery voltage to the leg support adjustment motor connector, and check that the leg support adjustment motor operates smoothly as follows.

OK:
Condition Switch Condition
Battery positive (+) → Terminal 2
Battery negative (-) → Terminal 1
Forward
Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 2
Backward


If the result is not as specified, replace the front seat cushion panel sub-assembly.

Text in Illustration
*a Component without wire harness connected
(Front Seat Cushion Panel Sub-assembly (Leg Support Adjustment Motor))



Hide 71103B 6.INSPECT FRONT SEATBACK FRAME SUB-ASSEMBLY RH

a.
B356566E01
0.295,0.224 0.479,0.398 0.184,0.174 10 *a 0.295,1.484 0.479,1.658 0.184,0.174 10 *1 1.727,1.484 1.911,1.658 0.184,0.174 10 *2 0.851,1.581 0.484,1.581 false 1.716,1.581 1.349,1.581 false

Check the operation of the reclining motor RH.

i.

Apply battery voltage to the reclining motor RH connector, and check that the reclining motor RH operates smoothly as follows.

OK:
Condition Switch Condition
Battery positive (+) → Terminal 2
Battery negative (-) → Terminal 1
Forward
Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 2
Backward


If the result is not as specified, replace the front seatback frame sub-assembly RH.

Text in Illustration
*1 Terminal 1
*2 Terminal 2
*a Component without wire harness connected
(Front Seatback Frame Sub-assembly RH (Reclining Motor RH))



Hide 71110A 7.INSPECT FRONT SEAT CUSHION FRAME SUB-ASSEMBLY RH

a.

Check the operation of the slide motor RH.

i.
B353918E01
0.501,0.246 0.694,0.439 0.193,0.193 10 *a

Apply battery voltage to the slide motor RH connector, and check that the slide motor RH operates smoothly as follows.

OK:
Condition Switch Condition
Battery positive (+) → Terminal 4
Battery negative (-) → Terminal 3
Forward
Battery positive (+) → Terminal 3
Battery negative (-) → Terminal 4
Backward


If the result is not as specified, replace the front seat cushion frame sub-assembly RH.

Text in Illustration
*a Component without wire harness connected
(Front Seat Cushion Frame Sub-assembly RH (Slide Motor RH))