Home › Vehicle Interior › SEAT › LUMBAR SUPPORT ADJUSTER ASSEMBLY
RM27M0U _58 Vehicle Interior _049136 SEAT _0234308 LUMBAR SUPPORT ADJUSTER ASSEMBLY G

SEAT  LUMBAR SUPPORT ADJUSTER ASSEMBLY  INSPECTION  


PROCEDURE

Hide 1.INSPECT LUMBAR SUPPORT ADJUSTER ASSEMBLY LH (w/ Seat Position Memory System)

a.
B333312E01
0.603,0.199 0.782,0.369 0.179,0.170 10 *a

Check the operation of the lumbar support adjuster assembly LH.

i.

Apply battery voltage to the lumbar support motor LH connector, and check that the lumbar support adjuster assembly LH operates smoothly as follows.

OK:
Tester Connection Switch Condition
Battery positive (+) → Terminal 2
Battery negative (-) → Terminal 1
Hold
Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 2
Release


If the result is not as specified, replace the lumbar support adjuster assembly LH.

Text in Illustration
*a Component without wire harness connected
(Lumbar Support Adjuster Assembly LH)



Hide 2.INSPECT LUMBAR SUPPORT ADJUSTER ASSEMBLY LH (w/o Seat Position Memory System)

a.
B333312E01
0.603,0.199 0.782,0.369 0.179,0.170 10 *a

Check the operation of the lumbar support adjuster assembly LH.

i.

Apply battery voltage to the lumbar support motor LH connector, and check that the lumbar support adjuster assembly LH operates smoothly as follows.

OK:
Tester Connection Switch Condition
Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 2
Hold
Battery positive (+) → Terminal 2
Battery negative (-) → Terminal 1
Release


If the result is not as specified, replace the lumbar support adjuster assembly LH.

Text in Illustration
*a Component without wire harness connected
(Lumbar Support Adjuster Assembly LH)



Hide 3.INSPECT LUMBAR SUPPORT ADJUSTER ASSEMBLY RH

a.
B333312E01
0.603,0.199 0.782,0.369 0.179,0.170 10 *a

Check the operation of the lumbar support adjuster assembly RH.

i.

Apply battery voltage to the lumbar support motor RH connector, and check that the lumbar support adjuster assembly RH operates smoothly as follows.

OK:
Tester Connection Switch Condition
Battery positive (+) → Terminal 2
Battery negative (-) → Terminal 1
Hold
Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 2
Release


If the result is not as specified, replace the lumbar support adjuster assembly RH.

Text in Illustration
*a Component without wire harness connected
(Lumbar Support Adjuster Assembly RH)