Home › Vehicle Interior › SEAT › CLIMATE CONTROL SEAT SYSTEM
RM27M0U _58 Vehicle Interior _049136 SEAT _0234312 CLIMATE CONTROL SEAT SYSTEM U

SEAT  CLIMATE CONTROL SEAT SYSTEM  TERMINALS OF ECU  


AIR CONDITIONING AMPLIFIER


a.

Measure the voltage and resistance according to the value(s) in the table below.

U152941E02
6.229,0.177 6.406,0.344 0.177,0.167 10 false z1 4.073,0.198 4.333,0.365 0.26,0.167 10 false J19 1.344,0.208 1.667,0.375 0.323,0.167 10 false J106

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
J106-9 (SVDB) - Body ground R - Body ground Output climate control signal (Driver side) Ignition switch ON
Seat heater switch LH on
Pulse generation
(see waveform)
J106-10 (SVPB) - Body ground BE - Body ground Output climate control signal (Front passenger side) Ignition switch ON
Seat heater switch RH on
Pulse generation
(see waveform)

i.
E344748E01
2.99,1.427 3.333,1.604 0.344,0.177 10 false GND

Using an oscilloscope, check waveform.

Measurement Condition
Item Content
Terminal No. (Symbol) J106-9 (SVDB) - Body ground
J106-10 (SVPB) - Body ground
Tool Setting 2 V/DIV., 500 μsec/DIV.
Condition Ignition switch ON
Seat heater switch on