Home › Vehicle Interior › SEAT › FRONT SEATBACK HEATER(for Manual Seat) › 2015.08–2016.08
RM27M0U _58 Vehicle Interior _049136 SEAT _0234314 FRONT SEATBACK HEATER(for Manual Seat) A

SEAT  FRONT SEATBACK HEATER(for Manual Seat)  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


PROCEDURE

Hide 1.REMOVE FRONT SEAT ASSEMBLY RH

HINT:

Use the same procedure as for the driver seat (See page Vehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Manual Seat)>REMOVAL).


Hide 72525A 2.REMOVE RECLINING ADJUSTER RELEASE HANDLE RH

a.

Raise the reclining adjuster release handle RH to reveal the claw.


b.
B356049E01
2.027,0.347 2.203,0.498 0.177,0.151 10 *1 2.204,0.455 2.571,0.602 false

Using a screwdriver, detach the claw and remove the reclining adjuster release handle RH.

HINT:

Tape the screwdriver tip before use.


Text in Illustration
*1 Protective Tape


Hide 71811D 3.REMOVE FRONT SEAT CUSHION SHIELD RH

a.
B356050

Disconnect the 2 rubber bands.


b.
U152082E01
1.289,0.806 1.489,0.976 0.200,0.170 10 (1) 3.059,1.946 3.259,2.116 0.200,0.170 10 (2)

Remove the 3 screws.


c.

Detach the guide, clip and 2 claws as indicated by the arrows in the order shown in the illustration to remove the front seat cushion shield RH.


Hide 71867A 4.REMOVE FRONT INNER NO. 1 SEAT CUSHION SHIELD RH

a.
B356052

Remove the 2 screws.


b.

Detach the guide in the direction indicated by the arrow shown in the illustration to remove the front inner No. 1 seat cushion shield RH.


Hide 5.REMOVE SEPARATE TYPE FRONT SEATBACK ASSEMBLY

a.
B354558

Disconnect the connector.


b.

Detach the wire harness clamp to disconnect the wire harness of the front seatback heater assembly RH.


c.
B356053E01
0.14,0.183 0.317,0.336 0.177,0.152 10 *1 1.09,0.267 0.329,0.267 false 0.14,0.798 0.317,0.950 0.177,0.152 10 *2 1.021,0.882 0.329,0.882 false 1.056,0.427 0.471,0.883 0.471,0.883 1.137,1.493 false

Detach the connector clamp and 3 wire harness clamps to disconnect the wire harness of the front seat airbag assembly RH.

Text in Illustration
*1 Connector Clamp
*2 Wire Harness Clamp


d.
B356054

Remove the 4 bolts and separate type front seatback assembly.


Hide 71073S 6.REMOVE SEPARATE TYPE FRONT SEATBACK COVER

a.
B356055

Detach the hook.


b.
B356056

Pull out the 2 wire harnesses from the separate type front seatback cover.


c.
B356057

Open the 2 fasteners.


d.
B356058

Detach the 2 hooks.

i.

Remove the 4 clips.


ii.

Slide each hook to detach them.



e.

Pull out the 4 straps of the separate type front seatback cover from the separate type front seatback pad.


f.
B356059E01
1.283,0.523 0.63,0.523 false 0.454,0.446 0.610,0.591 0.156,0.145 10 *1 1.417,0.265 0.63,0.265 false 0.454,0.188 0.610,0.333 0.156,0.145 10 *1 1.331,1.12 0.63,1.12 false 2.186,0.523 2.839,0.523 false 2.053,0.265 2.839,0.265 false 2.138,1.12 2.839,1.12 false 0.454,1.043 0.610,1.189 0.156,0.145 10 *1 2.852,0.446 3.008,0.591 0.156,0.145 10 *1 2.852,0.188 3.008,0.333 0.156,0.145 10 *1 2.852,1.043 3.008,1.189 0.156,0.145 10 *1

Detach the 6 fasteners.

Text in Illustration
*1 Fastener


g.
B354565

Remove the 2 hog rings.


h.
B354567

Detach the 4 claws to remove the 2 front seat headrest supports.


i.

Remove the separate type front seatback cover from the separate type front seatback pad.


Hide 87510M 7.REMOVE FRONT SEATBACK HEATER ASSEMBLY RH

a.
B356060

Remove the 8 tack pins to remove the front seatback heater assembly RH.