84928
1.INSPECT SEAT VARIABLE CUSHION SWITCH
Check the resistance of the seat variable cushion switch.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Switch Condition | Specified Condition |
|---|---|---|
| 2- 5 | Front switch on | Below 1 Ω |
| 3- 4 | ||
| 1- 5 | Neutral | |
| 3- 4 | ||
| 1- 5 | Rear switch on | |
| 2- 3 |
If the result is not as specified, replace the seat variable cushion switch.
| *1 | Front Switch |
| *2 | Rear Switch |
| *a | Component without wire harness connected
(Seat Variable Cushion Switch) |