WIRELESS DOOR CONTROL SYSTEM DESCRIPTION
This system locks and unlocks the vehicle's doors remotely. The wireless control system has the following features:
The door control receiver performs the code identification procedure and the main body ECU operates the door lock control. A serial data link is provided for communication between the receiver and main body ECU.
A key-holder type transmitter is used and it contains the following 3 switches: the door lock switch, door unlock switch and panic alarm switch.
FUNCTION OF MAIN COMPONENTS
| Components | Functions |
|---|---|
| Door control transmitter | ·
Contains LOCK, UNLOCK and PANIC switches. ·
Transmits weak electric waves (recognition codes and function codes) to door control receiver. |
| Door control receiver | Receives weak electric waves (recognition codes and function codes) from door control transmitter, and changes waves to code data. |
| Door lock (door unlock detection switch) | Transmits door lock conditions of each door to main body ECU. |
| Unlock warning switch | Detects if key is in ignition key cylinder. |
| Front door courtesy light switch | Turns ON when door is open and turns OFF when door is closed. Outputs door status (open or closed) to main body ECU. |
| Rear door courtesy light switch*1, *2 | Turns ON when door is open and turns OFF when door is closed. Outputs door status (open or closed) to main body ECU. |
| Wireless door lock buzzer | Emits beep (answer-back) when doors are locked or unlocked by wireless operation. |
*1: for Double Cab
*2: for CrewMax
SYSTEM FUNCTION
The wireless door lock control system has the following functions.
| Function | Outline |
|---|---|
| All door lock function | Pressing LOCK switch locks all doors. |
| Only driver side door unlock operation function | Pressing UNLOCK switch once unlocks only driver side door. |
| All door unlock operation (2 step unlock operation) function | Pressing UNLOCK switch twice within 3 seconds unlocks all doors after driver side door is unlocked. |
| Answer-back function | ·
Hazard warning lights and door mirror turn indicators flash once when doors are locked, and flash twice when doors are unlocked to indicate that operation has been completed. ·
Wireless door lock buzzer sounds once when doors are locked, and sounds twice when doors are unlocked to inform that operation has been completed. |
| Automatic locking function | If no doors are opened within 30 seconds after being unlocked by wireless transmitter, all doors are locked again automatically. |
| Door ajar warning function | If any door is open or ajar, pressing LOCK switch will cause wireless door lock buzzer to sound for about 10 seconds. |
| Illuminated entry function | If locked doors are unlocked through wireless operation, ignition key cylinder light, map light, room light, foot light and door mirror foot light* illuminate. If one of following situations occurs, lights fade out:
·
Within 15 seconds, doors are not opened and doors are locked through wireless operation. ·
Within 15 seconds, key is inserted into ignition key cylinder and ignition switch is turned ACC or ON. ·
No operations or actions are performed within 15 seconds. |
| Panic function | Holding down PANIC switch for more than 1 second sounds security horn and vehicle horns, blinks hazard warning lights, headlights, taillights and door mirror turn indicators, and illuminates map light and room light. |
| Security function | Sends signal as rolling code. |
| Transmitter recognition code registration function | Enables 4 modes for registering (writing and storing) transmitter recognition codes in EEPROM built into door control receiver. |
With no key in the ignition key cylinder (unlock warning switch is OFF) and all door courtesy light switches OFF, pressing the door control transmitter's LOCK / UNLOCK switch causes the transmitter to output weak electrical waves to the door control receiver.
*:except Extended Type