CHECK DTC
Connect the Techstream to the DLC3.
Turn the ignition switch ON and turn the Techstream on.
Enter the following menus: Body Electrical / Main Body / Trouble Codes.
Check DTCs.
Refer to the Techstream operator's manual for further details.
Confirm the details of the DTCs (see page Vehicle Interior>DOOR LOCK>WIRELESS DOOR LOCK CONTROL SYSTEM>DIAGNOSTIC TROUBLE CODE CHART).
CLEAR DTC
Connect the Techstream to the DLC3.
Turn the ignition switch ON and turn the Techstream on.
Enter the following menus: Body Electrical / Main Body / Trouble Codes.
Erase DTCs.
Refer to the Techstream operator's manual for further details.