CUSTOMIZING FUNCTION WITH TECHSTREAM (REFERENCE)
The following items can be customized.
When the customer requests a change in a function, first make sure that the function can be customized.
Record the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
Connect the Techstream to the DLC3.
Turn the ignition switch ON.
Turn the Techstream on.
Enter the following menus: Customize Setting.
Select the setting by referring to the table below.
| Display | Default | Contents | Setting |
|---|---|---|---|
| Hazard Answer Back | ON | When LOCK switch on transmitter is pressed, all hazard warning lights illuminate once. When UNLOCK switch is pressed, all hazard warning lights illuminate twice. | ON / OFF |
| Wireless Buzzer Resp | ON | Function that makes wireless buzzer sound for answer-back when transmitter LOCK / UNLOCK switch is pressed. | ON / OFF |
| Open Door Warning | ON | If door is not completely closed and transmitter LOCK switch is pressed, this function sounds a buzzer for 10 seconds. | ON / OFF |
| Wireless Control | ON | ON / OFF of wireless door lock function. | ON / OFF |
| Panic Function | ON | Operates security alarm when PANIC switch on transmitter is continuously pressed for 1 second. | ON / OFF |
| Unlock / 2 Operation | ON | Function that unlocks driver side door when unlock switch on transmitter is pressed once, and unlocks all doors when pressed twice. If setting is OFF, pressing unlock switch once makes all doors unlock. | ON / OFF |
| Wireless Auto Lock | ON | Function to control automatic relocking of doors after unlocking with wireless door lock function. | ON / OFF |
| Auto Lock Time | 30 seconds | Function to change time until relocking after unlocking. | 60 seconds/30 seconds |
CUSTOMIZING FUNCTION WITH MULTI-DISPLAY
The following items can be customized.
When the customer requests a change in a function, first make sure that the function can be customized.
Record the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
Turn the ignition switch ON.
Enter the following menus: SET UP / Vehicle / Vehicle Customization / Other vehicle settings.
Select the setting by referring to the table below.
| Display | Default | Contents | Setting |
|---|---|---|---|
| Lock/Unlock Feedback-Lights | ON | When LOCK switch on transmitter is pressed, all hazard warning lights illuminate once. When UNLOCK switch is pressed, all hazard warning lights illuminate twice. | ON / OFF |
| Lock/Unlock Feedback-Tone | ON | Function that makes wireless buzzer sound for answer-back when transmitter LOCK / UNLOCK switch is pressed. | ON / OFF |
| Wireless Lock When Door Opened | ON | If door is not completely closed and transmitter LOCK switch is pressed, this function sounds a buzzer for 10 seconds. | ON / OFF |
| Remote 2-Press Unlock | ON | Function that unlocks driver side door when unlock switch on transmitter is pressed once, and unlocks all doors when pressed twice. If setting is OFF, pressing unlock switch once makes all doors unlock. | ON / OFF |
| Auto Relock Timer | 30 seconds | Function to change time until relocking after unlocking. | 60 seconds/30 seconds |