Home › Vehicle Interior › DOOR LOCK › FRONT DOOR LOCK(for CrewMax)
RM27M0U _58 Vehicle Interior _049137 DOOR LOCK _0234332 FRONT DOOR LOCK(for CrewMax) G

DOOR LOCK  FRONT DOOR LOCK(for CrewMax)  INSPECTION  


PROCEDURE

Hide 69040A 1.INSPECT FRONT DOOR LOCK ASSEMBLY LH

a.

Check the door lock motor.

i.

Apply battery voltage to the door lock motor and check operation of the door lock motor.

B443034E01
5.51,1.573 5.896,1.573 true 4.469,1.583 4.854,1.583 true 4.948,2.115 5.115,1.802 true 5.26,1.781 5.458,2.115 true 3.99,0.479 6.417,0.844 2.427,0.365 10 false Component without harness connected: (Front Door Lock LH) 1.125,2.458 1.583,2.656 0.458,0.198 10 false Lock 2.365,2.167 2.823,2.365 0.458,0.198 10 false Unlock 4.375,1.51 4.531,1.719 0.156,0.208 10 false L 5.948,1.5 6.188,1.698 0.24,0.198 10 false UL 5.448,2.135 5.604,2.344 0.156,0.208 10 false E 4.729,2.135 5.156,2.365 0.427,0.229 10 false LSSR

OK:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 4 (L)
Battery negative (-) → Terminal 1 (UL)
Lock
Battery positive (+) → Terminal 1 (UL)
Battery negative (-) → Terminal 4 (L)
Unlock


If the result is not as specified, replace the door lock assembly.




b.

Check the door lock position switch.

i.

Measure the resistance according to the value(s) in the table below.

Standard resistance:
Tester Connection Switch Condition Specified Condition
7 (E) - 8 (LSSR) Unlock Below 1 Ω
Lock 10 kΩ or higher


If the result is not as specified, replace the door lock assembly.




c.

Check the door lock and unlock switch.

i.

Measure the resistance according to the value(s) in the table below.

B443035E01
4.396,1.75 4.823,1.75 true 4.896,2.135 5,1.802 true 5.417,2.135 5.271,1.771 true 2.281,0.281 2.792,0.469 0.51,0.188 10 false Unlock 2.458,1.146 2.969,1.333 0.51,0.188 10 false Lock 3.875,0.531 6.333,0.865 2.458,0.333 10 false Component without harness connected: (Front Door Lock LH) 4.188,1.688 4.438,1.896 0.25,0.208 10 false UL 4.823,2.146 5.073,2.354 0.25,0.208 10 false L 5.417,2.156 5.667,2.365 0.25,0.208 10 false E

Standard resistance:
Tester Connection Switch Condition Specified Condition
9 (L) - 7 (E) Lock Below 1 Ω
9 (L) - 7 (E)
10 (UL) - 7 (E)
OFF 10 kΩ or higher
10 (UL) - 7 (E) Unlock Below 1 Ω


If the result is not as specified, replace the door lock assembly.




Hide 69030A 2.INSPECT FRONT DOOR LOCK ASSEMBLY RH

a.

Check the door lock motor.

i.

Apply battery voltage to the door lock motor and check operation of the door lock motor.

B443036E01
4.906,2.104 5.104,1.781 true 5.26,1.781 5.448,2.094 true 4.854,1.583 4.49,1.583 true 5.875,1.583 5.51,1.583 true 0.76,2.104 1.25,2.313 0.49,0.208 10 false Unlock 2.063,2.385 2.552,2.594 0.49,0.208 10 false Lock 3.969,0.51 6.406,0.885 2.438,0.375 10 false Component without harness connected: (Front Door Lock RH) 4.385,1.521 4.542,1.719 0.156,0.198 10 false L 5.927,1.51 6.167,1.708 0.24,0.198 10 false UL 4.833,2.115 5.073,2.313 0.24,0.198 10 false E 5.406,2.104 5.833,2.313 0.427,0.208 10 false LSSR

OK:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 4 (L)
Battery negative (-) → Terminal 1 (UL)
Lock
Battery positive (+) → Terminal 1 (UL)
Battery negative (-) → Terminal 4 (L)
Unlock


If the result is not as specified, replace the door lock assembly.




b.

Check the door lock position switch.

i.

Measure the resistance according to the value(s) in the table below.

Standard resistance:
Tester Connection Switch Condition Specified Condition
7 (LSSR) - 8 (E) Unlock Below 1 Ω
Lock 10 kΩ or higher


If the result is not as specified, replace the door lock assembly.