Home › Vehicle Interior › ENGINE HOOD / DOOR › HOOD SUPPORT
RM27M0U _58 Vehicle Interior _049138 ENGINE HOOD / DOOR _0234333 HOOD SUPPORT A

ENGINE HOOD / DOOR  HOOD SUPPORT  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:

Remove the hood support assembly LH while holding the hood.


NOTICE:
·

Do not touch the extendable portion of the rod to prevent foreign objects from attaching to the hood support assembly LH surface.

·

Do not push the hood support assembly LH sideways because the hood support assembly LH may bend.



HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 53450A 1.REMOVE HOOD SUPPORT ASSEMBLY LH

a.
B354833E02
0.719,1 0.823,0.896 false 0.823,0.896 0.969,0.896 false 0.979,0.823 1.146,0.979 0.167,0.156 10 false *1 1.031,1.01 1.24,1.188 0.208,0.177 10 false (1) 0.948,0.552 1.156,0.729 0.208,0.177 10 false (2)

Using a screwdriver, remove the 2 stop rings as indicated by the arrows in the order shown in the illustration.

HINT:

Tape the screwdriver tip before use.


CAUTION:

Remove the hood support assembly LH while holding the hood.


Text in Illustration
*1 Protective Tape


b.

Detach the 2 ball joints and then remove the hood support assembly LH.


Hide 53440B 2.REMOVE NO. 1 HOOD SUPPORT BOLT

a.
B354834

Remove the No. 1 hood support bolt.