Home › Vehicle Interior › ENGINE HOOD / DOOR › HOOD
RM27M0U _58 Vehicle Interior _049138 ENGINE HOOD / DOOR _0234334 HOOD A

ENGINE HOOD / DOOR  HOOD  DISASSEMBLY  


PROCEDURE

Hide 76180 1.REMOVE HOOD BULGE ASSEMBLY

B355071E01
0.254,0.082 0.469,0.286 0.216,0.205 10 *1 0.434,0.168 0.756,0.168 false 0.756,0.168 0.984,0.505 false

a.

Put protective tape around the hood bulge assembly.

Text in Illustration
*1 Protective Tape


b.
B355072

Remove the 3 bolts.


c.

Detach the 8 clips and remove the hood bulge assembly.


Hide 53381 2.REMOVE HOOD TO RADIATOR SUPPORT SEAL

B355070

a.

Using a clip remover, remove the 10 clips and hood to radiator support seal.


Hide 53341B 3.REMOVE HOOD INSULATOR (w/ Hood Insulator)

B355069

a.

Using a clip remover, remove the 10 clips.


b.

Detach the 2 guides and remove the hood insulator.


Hide 85380 4.REMOVE FRONT WASHER NOZZLE AND HOSE ASSEMBLY

Hide 5.REMOVE WASHER HOSE ASSEMBLY

B355073

a.

Disconnect the washer hose assembly.


b.

Detach the 3 clamps and remove the washer hose assembly.