Home › Vehicle Interior › ENGINE HOOD / DOOR › REAR DOOR(for Double Cab)
RM27M0U _58 Vehicle Interior _049138 ENGINE HOOD / DOOR _0234338 REAR DOOR(for Double Cab) G

ENGINE HOOD / DOOR  REAR DOOR(for Double Cab)  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 67004 1.INSPECT REAR DOOR PANEL SUB-ASSEMBLY LH

B354852E01
2.901,0.8 3.085,0.969 0.184,0.170 10 D 3.013,0.583 3.197,0.752 0.184,0.170 10 C 4.54,0.66 4.724,0.829 0.184,0.170 10 E 4.435,0.863 4.619,1.032 0.184,0.170 10 F 5.507,1.388 5.691,1.558 0.184,0.170 10 G 5.661,1.759 5.845,1.929 0.184,0.170 10 H 4.603,4.547 4.787,4.717 0.184,0.170 10 I 4.715,4.954 4.899,5.124 0.184,0.170 10 J 2.032,4.365 2.216,4.535 0.184,0.170 10 A 2.663,4.554 2.847,4.724 0.184,0.170 10 B

a.

Check that the clearance measurements of areas A to J are within the standard range.

Standard measurement:
Area Specified Condition Area Specified Condition
A 4.7 to 7.7 mm (0.185 to 0.303 in.) F 2.5 to 5.5 mm (0.0984 to 0.217 in.)
B -1.5 to 1.5 mm (-0.0591 to 0.0591 in.) G 3.5 to 6.5 mm (0.138 to 0.256 in.)
C 3.2 to 6.2 mm (0.126 to 0.244 in.) H -1.4 to 1.6 mm (0.0551 to 0.0630 in.)
D 2.7 to 5.7 mm (0.106 to 0.224 in.) I 4.0 to 7.0 mm (0.156 to 0.277 in.)
E 3.2 to 6.2 mm (0.126 to 0.244 in.) J -1.1 to 1.9 mm (-0.0433 to 0.0748 in.)