53101
1.REMOVE RADIATOR GRILLE SUB-ASSEMBLY
53510
2.REMOVE HOOD LOCK ASSEMBLY
w/ Engine Hood Courtesy Switch:
Disconnect the connector.
Detach the clamp.
Using a screwdriver, remove the hood lock nut cap.
Tape the screwdriver tip before use.
| *1 | Protective Tape |
Remove the 2 bolts and hood lock bolt.
Remove the hood lock assembly.
Disconnect the hood lock control cable assembly.
53601
3.REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY
Detach the 3 claws.
Disconnect the hood lock control cable assembly and remove the hood lock control lever sub-assembly.
53630
4.REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY
Using a screwdriver, detach the hood lock control cable assembly from the clamps as shown in the illustration.
Tape the screwdriver tip before use.
Pull the hood lock control cable assembly from the engine room and remove it.
| *1 | Hood Lock Control Cable Assembly | *2 | Clamp |
| *3 | Grommet | - | - |