Home › Vehicle Interior › ENGINE HOOD / DOOR › REAR DOOR(for CrewMax)
RM27M0U _58 Vehicle Interior _049138 ENGINE HOOD / DOOR _0234341 REAR DOOR(for CrewMax) G

ENGINE HOOD / DOOR  REAR DOOR(for CrewMax)  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 67004 1.INSPECT REAR DOOR PANEL SUB-ASSEMBLY LH

B354856E01
2.943,0.776 3.094,0.932 0.151,0.156 10 D 3.055,0.58 3.206,0.736 0.151,0.156 10 C 4.933,0.655 5.084,0.811 0.151,0.156 10 E 4.825,0.86 4.976,1.016 0.151,0.156 10 F 5.89,1.444 6.041,1.600 0.151,0.156 10 G 2.093,4.386 2.244,4.542 0.151,0.156 10 A 2.698,4.564 2.849,4.720 0.151,0.156 10 B 4.991,4.578 5.142,4.734 0.151,0.156 10 I 5.103,4.97 5.254,5.126 0.151,0.156 10 J 6.044,1.822 6.195,1.978 0.151,0.156 10 H

a.

Check that the clearance measurements of areas A to J are within the standard range.

Standard measurement:
Area Specified Condition Area Specified Condition
A 4.7 to 7.7 mm (0.185 to 0.303 in.) F 0.7 to 3.7 mm (0.0276 to 0.146 in.)
B -1.5 to 1.5 mm (-0.0591 to 0.0591 in.) G 3.7 to 6.7 mm (0.146 to 0.264 in.)
C 3.7 to 6.7 mm (0.146 to 0.264 in.) H -1.5 to 1.5 mm (-0.0591 to 0.0591 in.)
D 0.8 to 3.8 mm (0.0315 to 0.150 in.) I 3.7 to 6.7 mm (0.146 to 0.264 in.)
E 3.7 to 6.7 mm (0.146 to 0.264 in.) J -1.5 to 1.5 mm (-0.0591 to 0.0591 in.)