Home › Engine / Hybrid System › CRUISE CONTROL › CRUISE CONTROL MAIN SWITCH
RM27M0U _51 Engine / Hybrid System _049139 CRUISE CONTROL _0234342 CRUISE CONTROL MAIN SWITCH G

CRUISE CONTROL  CRUISE CONTROL MAIN SWITCH  INSPECTION  


PROCEDURE

Hide 84632 1.INSPECT CRUISE CONTROL MAIN SWITCH

a.

Measure the resistance according to the value(s) in the table below.

E144729E02
0.901,2.551 0.533,2.834 false 1.401,2.551 1.77,2.829 false 0.409,2.844 0.762,3.038 0.353,0.194 10 CCS 1.654,2.844 1.965,3.038 0.312,0.194 10 ECC 2.558,2.707 3.001,2.901 0.443,0.194 10 (CCS) 2.551,2.025 3.001,2.219 0.450,0.194 10 (ECC) 3.815,2.377 4.390,2.572 0.574,0.194 10 ON-OFF 4.541,2.377 4.953,2.572 0.412,0.194 10 +RES 5.263,2.377 5.682,2.572 0.419,0.194 10 -SET 5.978,2.377 6.595,2.572 0.617,0.194 10 CANCEL 0.357,1.821 0.711,2.015 0.353,0.194 10 *a

Text in Illustration
*1 Component without harness connected
(Cruise Control Main Switch)
- -

Standard Resistance:
Tester Connection Switch Condition Specified Condition
1 (ECC) - 3 (CCS) Neutral 10 kΩ or higher
+RES 235 to 245 Ω
-SET 620 to 640 Ω
CANCEL 1510 to 1570 Ω
Main Switch OFF 10 kΩ or higher
Main Switch ON Below 1.5 Ω


If the result is not as specified, replace the cruise control main switch.