If the following conditions are detected while the cruise control is in operation, the system clears the stored vehicle speed in the ECM and cancels the cruise control operation.
| Vehicle Condition | Auto Cancel Condition | Fail-safe Deactivation Condition |
|---|---|---|
| Cruise control indicator light blinks | ·
Open or short in stop light switch circuit ·
Problem with vehicle speed signal |
Cruise control system is turned off and back on again using the cruise control min switch. |
·
Problem with stop light switch input circuit ·
Problem with cruise control main switch cancel circuit |
Ignition switch is turned off and back to ON again. | |
| Cruise control indicator remains illuminated (Cruise control system control of vehicle speed is canceled) | ·
Vehicle speed is lower than low speed limit (approximately 40 km/h (25 mph)) while driving with cruise control system controlling vehicle speed ·
VSC system operates while driving with cruise control system controlling vehicle speed |
Cruise control main switch is pushed to +/RES |
| Vehicle speed is lower than stored speed by approximately 16 km/h (10 mph) or more | Cruise control main switch is pushed to +/SET | |
| Cruise control indicator goes out | Problem with throttle position sensor or motor | Cruise control system is turned off and back on again using the cruise control min switch. |