37140
1.INSTALL FRONT PROPELLER SHAFT
Completely remove any oil or the like and clean the contact surfaces of the propeller shaft flange, differential flange and transfer flange.
for Front Differential Side:
Align the matchmarks on the differential and propeller shaft flange.
| *a | for Front Differential Side |
| *b | Matchmark |
Install the propeller shaft with the 4 washers and 4 nuts.
for Transfer Side:
Align the matchmarks on the transfer and propeller shaft flange.
| *a | for Transfer Side |
| *b | Matchmark |
Connect the propeller shaft with the 4 washers and 4 nuts.
37109
2.INSTALL PROPELLER SHAFT HEAT INSULATOR BRACKET SUB-ASSEMBLY
Install the heat insulator bracket to the crossmember with the 2 bolts.
37117
3.INSTALL PROPELLER SHAFT HEAT INSULATOR
Install the heat insulator to the heat insulator bracket with the 2 bolts.