37117
1.REMOVE PROPELLER SHAFT HEAT INSULATOR
Remove the 2 bolts and heat insulator from the heat insulator bracket.
37109
2.REMOVE PROPELLER SHAFT HEAT INSULATOR BRACKET SUB-ASSEMBLY
Remove the 2 bolts and heat insulator bracket from the crossmember.
37140
3.REMOVE FRONT PROPELLER SHAFT ASSEMBLY
for Front Differential Side:
Place matchmarks on the differential and propeller shaft flange.
| *a | for Front Differential Side |
| *b | Matchmark |
Remove the 4 nuts, 4 washers and disconnect the propeller shaft from the differential.
Use a rope to suspend the front edge of the propeller shaft.
for Transfer Side:
Place matchmarks on the transfer and propeller shaft flanges.
| *a | for Transfer Side |
| *b | Matchmark |
Remove the 4 nuts and 4 washers.
Remove the propeller shaft from the transfer flange.