Do not allow foreign matter, etc. to contact the ABS rotor bearing.
43521D
1.REMOVE FRONT WHEEL ADJUSTING NUT (for 2WD)
Using SST and a hammer, release the staked part of the adjusting nut.
Install a nut to the front axle hub, and fix it in a vise.
Using SST and the L-type handle, remove the front wheel adjusting nut.
43580
2.REMOVE FRONT AXLE WITH ABS ROTOR BEARING ASSEMBLY
Gently fix the front axle hub in a vise.
Do not damage the threads of the hub bolts.
Using SST, remove the bearing.
If part of the bearing remains in the front axle hub, use SST to remove it.
43502F
3.REMOVE FRONT AXLE HUB OIL SEAL
Using a screwdriver, pry the oil seal.
4.REMOVE PLUG (for 2WD)
Using a screwdriver and hammer, remove the plug.