Home › Drivetrain › AXLE › REAR AXLE SHAFT
RM27M0U _52 Drivetrain _049151 AXLE _0234392 REAR AXLE SHAFT A

AXLE  REAR AXLE SHAFT  DISASSEMBLY  


PROCEDURE

Hide 42312D 1.REMOVE REAR AXLE SHAFT SNAP RING

a.
C159455

Using a snap ring expander, remove the snap ring.


Hide 42312 2.REMOVE REAR AXLE SHAFT

a.
C159456E01
1.821,0.172 2.123,0.324 0.301,0.151 10 SST 1.651,0.595 1.651,0.264 false 1.651,0.264 1.789,0.264 false 1.687,1.541 2.416,1.541 false 2.44,1.454 2.741,1.605 0.301,0.151 10 SST

Using SST and a press, press out the rear axle shaft.

SST
09521-25011  
09521-60010  


b.

Remove the rear axle bearing inner retainer from the axle hub.


c.

Remove the rear axle shaft washer from the axle hub.


d.
F042797

Grind the rear axle bearing inner race surface using a grinder, then remove it with a chisel.


Hide 42450B 3.REMOVE REAR AXLE HUB AND BEARING ASSEMBLY

a.
C159457

Temporarily install 4 nuts to the housing bolts.

NOTICE:

Do not use any nuts removed from the vehicle, as they may be damaged.



b.

Using a hammer, remove the 4 housing bolts and rear axle hub and bearing.


c.

Remove the nuts.


Hide 42441B 4.REMOVE BRAKE DRUM OIL DEFLECTOR

a.
C159721E01
1.79,0.484 2.397,0.484 false 2.425,0.391 2.720,0.537 0.295,0.147 10 SST

Using SST, remove the 5 hub bolts.

SST
09650-17011  


b.

Remove the deflector and deflector gasket from the rear axle shaft.