Home › Suspension › SUSPENSION › FRONT SHOCK ABSORBER
RM27M0U _53 Suspension _049152 SUSPENSION _0234395 FRONT SHOCK ABSORBER A

SUSPENSION  FRONT SHOCK ABSORBER  DISASSEMBLY  


PROCEDURE

Hide 48680A 1.REMOVE FRONT SUPPORT TO FRONT SHOCK ABSORBER NUT

C159781E01
2.874,1.588 3.172,1.733 0.298,0.145 10 SST 2.812,1.663 2.576,1.663 false 2.576,1.663 2.334,1.807 false

a.

Secure SST in a vise.

SST
09727-30021  (09727-00010, 09727-00021, 09727-00031)


b.
C263591

Attach the arm of SST to the diameter of the coil spring.

CAUTION:
·

Make sure that the coil spring is installed so that the distance between the upper and lower hooks of SST is at the maximum.

·

Make sure that the claws of the hooks are securely attached.




c.

Using SST, compress the coil spring.

CAUTION:
·

If the coil spring bends during the compression, immediately stop the compression and reinstall SST.

·

Do not compress the spring until the coil springs contact each other.

·

Do not use an impact wrench.




d.
C155969

Remove the front support to front shock absorber nut.

CAUTION:

Do not remove the front support to front shock absorber nut when the coil spring is not free.



Hide 48609 2.REMOVE FRONT SUSPENSION SUPPORT SUB-ASSEMBLY LH

a.

Remove the suspension support, 2 retainers and 2 cushions from the shock absorber rod.


Hide 48132 3.REMOVE FRONT COIL SPRING LH

a.

Remove the coil spring from the shock absorber.