Use the same procedures for the RH side and LH side.
The procedures listed below are for the LH side.
1.REMOVE FRONT WHEEL
48810
2.REMOVE FRONT STABILIZER LINK ASSEMBLY LH
3.DISCONNECT FRONT SHOCK ABSORBER WITH COIL SPRING LH
Remove the nut and bolt, and disconnect the shock absorber from the lower side.
48626
4.DISCONNECT FRONT LOWER BALL JOINT ATTACHMENT LH
Remove the 2 bolts and disconnect the attachment from the steering knuckle.
48069
5.REMOVE FRONT NO. 1 SUSPENSION ARM SUB-ASSEMBLY LOWER LH
Place matchmarks on the No. 2 camber adjusting cam and No. 2 toe adjusting plate.
Remove the nut, washer, No. 2 camber adjusting cam, camber adjusting cam assembly, bolt, toe adjusting cam, No. 2 toe adjusting plate and front No. 1 suspension arm lower LH.
48626
6.REMOVE FRONT LOWER BALL JOINT ATTACHMENT LH
Remove the cotter pin and nut.
Using SST, remove the lower ball joint attachment.
Claw A 09955-04090
Claw B 09955-04031