48331E
1.INSTALL FRONT NO. 1 SPRING BUMPER LH
Install the No. 1 spring bumper to the vehicle.
48655E
2.INSTALL FRONT NO. 2 LOWER ARM LH
Using SST and a press, press in a new bush.
Press the bush while making sure the bush positioning protrusions are perpendicular to the lower arm, as shown in the illustration.
48654F
3.INSTALL FRONT NO. 1 LOWER ARM BUSH LH
Using SST and a press, press in a new bush.
48626
4.INSTALL FRONT LOWER BALL JOINT ATTACHMENT LH
Install the attachment with the nut and a new cotter pin.
If the holes for the cotter pin are not aligned, tighten the nut further up to 60°.