Home › Vehicle Interior › AIR CONDITIONING › AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System)
RM27M0U _58 Vehicle Interior _049154 AIR CONDITIONING _0234412 AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System) J

AIR CONDITIONING  AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System)  ECU Power Source Circuit  


DESCRIPTION

This circuit provides power to operate the air conditioning amplifier.

WIRING DIAGRAM

E146515E01
4.468,0.583 4.652,0.785 0.184,0.202 10 21 4.468,1.423 4.652,1.625 0.184,0.202 10 14 4.754,0.683 4.910,0.866 0.156,0.184 10 B 4.763,1.535 5.179,1.719 0.416,0.184 10 GND 4.496,1.916 4.819,2.100 0.323,0.184 10 J19 4.496,2.098 6.180,2.282 1.684,0.184 10 Air Conditioning Amplifier 0.805,0.666 1.618,0.831 0.813,0.165 10 from Battery 2.332,0.549 2.641,0.742 0.309,0.193 10 A/C

PROCEDURE

1.INSPECT FUSE (A/C)
a.

Remove the A/C fuse from the main body ECU.


b.

Measure the resistance according to the value(s) in the table below.

Standard resistance:
Tester Connection Condition Specified Condition
A/C fuse Always Below 1 Ω




OK

2.CHECK HARNESS AND CONNECTOR (AIR CONDITIONING AMPLIFIER - BATTERY AND BODY GROUND)

NG

REPLACE FUSE

2.CHECK HARNESS AND CONNECTOR (AIR CONDITIONING AMPLIFIER - BATTERY AND BODY GROUND)
U152751E02
2.51,2.521 2.708,2.885 false 1.698,2.448 1.354,2.906 false 0.26,0.469 2.542,0.854 2.281,0.385 10 false Rear view of wire harness connector: (to Air Conditioning Amplifier) 0.719,2.427 1,2.646 0.281,0.219 10 false J19 1.177,2.969 1.583,3.146 0.406,0.177 10 false GND 2.708,2.927 2.854,3.104 0.146,0.177 10 false B

a.

Disconnect the J19 air conditioning amplifier connector.


b.

Measure the resistance and voltage according to the value(s) in the table below.

Standard resistance:
Tester Connection Condition Specified Condition
J19-14 (GND) - Body ground Always Below 1 Ω


Standard voltage:
Tester Connection Condition Specified Condition
J19-21 (B) - Body ground Always 11 to 14 V




OK

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR