CHECK DTC
Connect the Techstream to the DLC3.
Turn the ignition switch ON.
Turn the Techstream on.
Enter the following menus: Body Electrical / Air conditioner / Trouble Codes.
Check for DTCs.
CLEAR DTC
Connect the Techstream to the DLC3.
Turn the ignition switch ON.
Turn the Techstream on.
Enter the following menus: Body Electrical / Air conditioner / Trouble Codes.
Clear the DTCs.
INDICATOR CHECK
Press and hold the A/C control AUTO switch and Recirculation / Fresh switch simultaneously, and turn the ignition switch ON. Continue holding the 2 switches until the panel diagnosis mode begins.
Check that all indicators turn on and off 4 times in succession at 1 second intervals.
After the indicator check is completed, the system enters the DTC mode automatically.
Press the "OFF" switch to cancel the indicator check.