Home › Vehicle Interior › AIR CONDITIONING › AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System)
RM27M0U _58 Vehicle Interior _049154 AIR CONDITIONING _0234412 AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System) D

AIR CONDITIONING  AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System)  ACTUATOR CHECK  


ACTUATOR CHECK


E275653

a.

Turn the ignition switch ON while pressing the A/C control AUTO switch and Recirculation / Fresh switch simultaneously.


b.
E275654

Press the Recirculation / Fresh switch.


c.

As each damper, motor and relay automatically operate the actuator check at 1 second intervals from step No. 1 to No. 10 continuously, check the temperature and airflow visually and by hand.



HINT:
·

If a slower display is desired, press the driver temperature up switch and change the display in the step operation. Each time the driver temperature up switch is pressed, the display changes by 1 step.

·

The buzzer sounds when the displayed trouble code changes.

·

Codes are displayed from smaller to larger numbers in order.

·

To cancel the check mode, press the "OFF" switch.



Air conditioning unit
Step No. Display Code Condition
Blower Level Air Mix Damper Airflow Vent Air Inlet Damper Compressor
1 0 0 0% open FACE FRESH OFF
2 1 1 0% open FACE FRESH OFF
3 2 17 0% open FACE RECIRCULATION / FRESH ON
4 3 17 0% open FACE RECIRCULATION ON
5 4 17 50% open B/L RECIRCULATION ON
6 5 17 50% open B/L RECIRCULATION ON
7 6 17 50% open FOOT FRESH ON
8 7 17 100% open FOOT-0 FRESH ON
9 8 17 100% open F/D FRESH ON
10 9 31 100% open DEF FRESH ON