55990B
1.REMOVE LOWER DEFROSTER NOZZLE ASSEMBLY
Detach the 4 claws and remove the lower defroster nozzle assembly.
87201
2.REMOVE NO. 1 AIR DUCT SUB-ASSEMBLY
Detach the 4 claws and remove the No. 1 air duct sub-assembly.
88899M
3.REMOVE AIR FILTER COVER PLATE
Detach the 2 claws and remove the air filter cover plate.
87139C
4.REMOVE CLEAN AIR FILTER
Remove the clean air filter.
87201F
5.REMOVE NO. 3 AIR DUCT SUB-ASSEMBLY
Remove the screw and No. 3 air duct sub-assembly.
88650E
6.REMOVE AIR CONDITIONING AMPLIFIER ASSEMBLY
87103B
7.REMOVE BLOWER WITH FAN MOTOR SUB-ASSEMBLY
Remove the 3 screws and blower with fan motor sub-assembly.
8.REMOVE AIR DUCT
Remove the 2 screws and air duct.
87106D
9.REMOVE NO. 1 DAMPER SERVO SUB-ASSEMBLY
Disconnect the 2 connectors.
Remove the 4 screws and No. 1 damper servo sub-assembly.
87106L
10.REMOVE DAMPER SERVO SUB-ASSEMBLY (for Automatic Air Conditioning System)
Disconnect the connector.
Remove the 3 screws and damper servo sub-assembly.
11.REMOVE BLOWER UPPER CASE SUB-ASSEMBLY
Remove the 3 screws.
Detach the 2 claws and remove the blower upper case sub-assembly.
87106G
12.REMOVE BLOWER DAMPER SERVO SUB-ASSEMBLY
Disconnect the connector.
Remove the 3 screws and blower damper servo sub-assembly.
87106B
13.REMOVE COOLING UNIT DAMPER SERVO SUB-ASSEMBLY (for Automatic Air Conditioning System)
Disconnect the connector.
Remove the 3 screws and cooling unit damper servo sub-assembly.
87107A
14.REMOVE HEATER RADIATOR UNIT SUB-ASSEMBLY
Remove the 3 screws and plate.
Detach the 3 claws and remove the heater clamp.
Remove the heater radiator unit sub-assembly.
88501
15.REMOVE NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY
Remove the No. 1 cooling unit packing and No. 2 cooling unit packing.
Remove the 6 screws and detach the 3 claws.
Remove the blower case (back side).
Remove the No. 1 cooler evaporator sub-assembly from the blower case (front side).
88625
16.REMOVE NO. 1 COOLER THERMISTOR
Remove the No. 1 cooler thermistor.
88515
17.REMOVE COOLER EXPANSION VALVE
Using a 4 mm hexagon wrench, remove the 2 bolts.
Remove the tube and accessory and 2 O-rings.
Remove the cooler expansion valve and 2 O-rings from the No. 1 cooler evaporator sub-assembly.