Home › Vehicle Interior › AIR CONDITIONING › COMPRESSOR
RM27M0U _58 Vehicle Interior _049154 AIR CONDITIONING _0234425 COMPRESSOR A

AIR CONDITIONING  COMPRESSOR  DISASSEMBLY  


PROCEDURE

Hide 88688K 1.REMOVE COOLER COMPRESSOR BRACKET

a.
E168828

Detach the harness clamp.


b.

Remove the screw and the cooler compressor bracket.


Hide 88410 2.REMOVE MAGNET CLUTCH ASSEMBLY

a.
E168829E02
1.354,1.552 0.76,1.552 false 0.427,1.479 0.76,1.677 0.333,0.198 10 false SST

Clamp the cooler compressor assembly in a vise.


b.

Using SST, hold the magnet clutch hub.

SST
09985-00270  


c.

Remove the bolt, magnet clutch hub and magnet clutch washer(s).

HINT:

There is no set number of magnet clutch washers since they are used for adjusting.



d.
I104018

Using a snap ring expander, remove the snap ring and the magnet clutch rotor.

NOTICE:

Do not damage the seal cover of the bearing when removing the snap ring.



e.

Disconnect the connector.


f.
I104019

Using a snap ring expander, remove the snap ring and magnet clutch stator.