Home › Vehicle Interior › THEFT DETERRENT › THEFT DETERRENT SYSTEM
RM27M0U _58 Vehicle Interior _049155 THEFT DETERRENT _0234426 THEFT DETERRENT SYSTEM D

THEFT DETERRENT  THEFT DETERRENT SYSTEM  CUSTOMIZE PARAMETERS  


CUSTOMIZING FUNCTION WITH TECHSTREAM


NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Be sure to make a note of the current settings before customizing.

·

When troubleshooting a function, first make sure that the function is set to the default setting.



a.

Connect the Techstream to the DLC3.


b.

Turn the ignition switch ON.


c.

Turn the Techstream on.


d.

Enter the following menus: Customize Setting.


e.

Select the setting by referring to the table below.

Main Body
Display Default Contents Setting
Warning by Horn ON Function that allows vehicle horns and theft deterrent horn to be used as warning device. ON or OFF
Passive Mode (Security system) OFF Function that switches theft deterrent system from arming preparation state to armed state 30 seconds after key is not inside vehicle and driver side door is closed.
In passive arming mode, theft deterrent system will judge that theft is taking place and switch to alarm sounding state if one of following operations is not performed within 14 seconds (see entry delay below) after door is opened:
·

Unlock any door by key or wireless operation

·

Turn ignition switch ON


ON or OFF
Entry Delay 14 s Function that changes entry delay time (time before warning starts) for PASSIVE ARMING MODE 0 s / 14 s / 30 s
Warning by Glass Broken Sensor* ON Function that turns glass breakage sensor ON/OFF.
This function is only effective for vehicles with glass breakage sensor.
ON or OFF

HINT:

*: w/ Glass Breakage Sensor