Home › Vehicle Interior › THEFT DETERRENT › ENGINE HOOD COURTESY SWITCH
RM27M0U _58 Vehicle Interior _049155 THEFT DETERRENT _0234431 ENGINE HOOD COURTESY SWITCH G

THEFT DETERRENT  ENGINE HOOD COURTESY SWITCH  INSPECTION  


PROCEDURE

Hide 53510 1.INSPECT HOOD LOCK ASSEMBLY (HOOD COURTESY SWITCH)

B356562E01
0.633,0.134 0.851,0.346 0.218,0.212 10 *a 2.766,0.134 3.179,0.328 0.413,0.195 10 *b 5.019,0.134 5.432,0.328 0.413,0.195 10 *c

Text in Illustration
*a Lock position
*b Unlock position
*c Component without harness connected
(Hood Lock Assembly (Hood Courtesy Switch))

a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
1 - 2 Lock position Below 1 Ω
1 - 2 Unlock position 10 kΩ or higher


If the results are not as specified, replace the hood lock assembly (hood courtesy switch).