CUSTOMIZING FUNCTION WITH TECHSTREAM
When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
Connect the Techstream to the DLC3.
Turn the ignition switch to ON.
Turn the Techstream ON.
Enter the following menus: Customize Setting.
Select the setting by referring to the table below.
| Display (Item) | Default | Contents | Setting |
|---|---|---|---|
| Key Remind Volume | Large | To change volume of key reminder buzzer | Large / Medium / Small |
| Key Remind Sound | Slow | To change frequency of key reminder buzzer | Slow / Fast / Normal |
| Driver Side Seatbelt Warning Buzzer | ON | To change setting of driver side seat belt warning buzzer | ON / OFF |
| Front Passenger Side Seatbelt Warning Buzzer | ON | To change setting of front passenger side seat belt warning buzzer | ON / OFF |
| Display (Item) | Default | Contents | Setting |
|---|---|---|---|
| ODO Display Time After IG OFF Setting | 30 s | To change setting of odometer display time | 30 s / 60 s / 600 s / OFF |
CUSTOMIZING FUNCTION WITH MULTI-INFORMATION DISPLAY (for TFT Display Type)
Using the DISP switch, the following functions can be customized through the multi-information display.
Turn by turn navigation setting
Language setting
Units setting