Home › Vehicle Interior › METER / GAUGE / DISPLAY › METER / GAUGE SYSTEM
RM27M0U _58 Vehicle Interior _049157 METER / GAUGE / DISPLAY _0234436 METER / GAUGE SYSTEM C

METER / GAUGE / DISPLAY  METER / GAUGE SYSTEM  U0129  Lost Communication with Brake System Control Module  


DESCRIPTION

The combination meter communicates with the skid control ECU via the CAN line.

DTC Code DTC Detection Condition Trouble Area
U0129 When either of following conditions is detected:
·

15 seconds have elapsed since engine started and IG voltage 10.5 V or more

·

No communication with skid control ECU continues for 3 seconds or more (No communication with ECM or skid control ECU continues for 60 seconds or more)


CAN communication system

WIRING DIAGRAM

E344836E02
1.385,2.781 2.479,2.958 1.094,0.177 10 false Skid Control ECU 4.885,2.792 6.073,2.99 1.188,0.198 10 false Combination Meter 2.948,1.74 4.531,1.938 1.583,0.198 10 false CAN Communication Line

PROCEDURE

1.CHECK FOR DTC
a.

Check for DTCs and note any codes that are output (See page Vehicle Interior>METER / GAUGE / DISPLAY>METER / GAUGE SYSTEM>DTC CHECK / CLEAR).



c.

Recheck for DTC (See page Vehicle Interior>METER / GAUGE / DISPLAY>METER / GAUGE SYSTEM>DTC CHECK / CLEAR).

Result
Result Proceed to
DTC U0129 is not output A
DTC U0129 is output B

HINT:

If the CAN communication system DTC U0129 and another DTC are output at the same time, perform troubleshooting for the CAN communication system DTC U0129 first.




A

B