Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM
RM27M0U _56 Audio / Visual / Telematics _049158 NAVIGATION / MULTI INFO DISPLAY _0234440 NAVIGATION SYSTEM J

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM  No Sound can be Heard from Speakers  


CAUTION / NOTICE / HINT

HINT:

When the "iPhone" is connected to the USB port of the No. 1 stereo jack adapter, Entune audio may not be output. Before performing troubleshooting, disconnect the "iPhone" connected to the USB port of the No. 1 stereo jack adapter, change the audio output source of the "iPhone" or turn the ignition switch off and then ON again.


PROCEDURE

1.CHECK AUDIO SETTINGS
a.

In sound output setting mode, set volume, fader and balance to the initial values and check that the sound is normal.

OK:

Audio system returns to normal.


HINT:

Sound quality adjustment measures vary according to the type of amplifier.




OK

END

NG

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE