74232
1.REMOVE FRONT UPPER ARMREST BASE PANEL LH
Using a moulding remover A, detach the 2 clips and 5 claws, and remove the front upper armrest base panel LH.
| *A | for Regular Cab |
| *B | for Double Cab, for CrewMax |
Disconnect the master switch connector.
| *A | for Regular Cab |
| *B | for Double Cab, for CrewMax |
84820
2.REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY
Remove the 3 screws and power window regulator master switch assembly.
| *A | for Regular Cab |
| *B | for Double Cab, for CrewMax |