84810D
1.INSPECT REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Switch Condition | Specified Condition |
|---|---|---|
| 4 (U) - 3 (B) | UP | Below 1 Ω |
| 1 (D) - 2 (SD) | ||
| 4 (U) - 5 (SU) | OFF | |
| 1 (D) - 2 (SD) | ||
| 4 (U) - 5 (SU) | DOWN | |
| 1 (D) - 3 (B) |
If the result is not as specified, replace the rear power window regulator switch assembly.
| *a | Component without harness connected
(Rear Power Window Regulator Switch Assembly) |