85720D
1.REMOVE POWER WINDOW REGULATOR MOTOR ASSEMBLY LH (for Double Cab)
Apply battery voltage to connector terminals 1 and 2.
Check that the motor gear rotates smoothly as follows.
| Measurement Condition | Specified Condition |
|---|---|
| Battery positive (+) → 1
Battery negative (-) → 2 |
Motor gear rotates counterclockwise |
| Battery positive (+) → 2
Battery negative (-) → 1 |
Motor gear rotates clockwise |
If the result is not as specified, replace the rear power window regulator motor assembly LH.
| *1 | Motor Gear |
| *a | Component without harness connected
(Rear Power Window Regulator Motor Assembly LH) |
| *b | Clockwise |
| *c | Counterclockwise |
85710E
2.INSPECT REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY LH (for CrewMax)
Apply battery voltage to connector terminals 1 and 2.
Check that the motor gear rotates smoothly as follows.
| Measurement Condition | Specified Condition |
|---|---|
| Battery positive (+) → 1
Battery negative (-) → 2 |
Motor gear rotates counterclockwise |
| Battery positive (+) → 2
Battery negative (-) → 1 |
Motor gear rotates clockwise |
If the result is not as specified, replace the rear power window regulator motor assembly LH.
| *1 | Motor Gear |
| *a | Component without harness connected
(Rear Power Window Regulator Motor Assembly LH) |
| *b | Clockwise |
| *c | Counterclockwise |
85710E
3.REMOVE POWER WINDOW REGULATOR MOTOR ASSEMBLY RH (for Double Cab)
Apply battery voltage to connector terminals 1 and 2.
Check that the motor gear rotates smoothly as follows.
| Measurement Condition | Specified Condition |
|---|---|
| Battery positive (+) → 1
Battery negative (-) → 2 |
Motor gear rotates counterclockwise |
| Battery positive (+) → 2
Battery negative (-) → 1 |
Motor gear rotates clockwise |
If the result is not as specified, replace the rear power window regulator motor assembly RH.
| *1 | Motor Gear |
| *a | Component without harness connected
(Rear Power Window Regulator Motor Assembly RH) |
| *b | Clockwise |
| *c | Counterclockwise |
85720D
4.INSPECT REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY RH (for CrewMax)
Apply battery voltage to connector terminals 1 and 2.
Check that the motor gear rotates smoothly as follows.
| Measurement Condition | Specified Condition |
|---|---|
| Battery positive (+) → 1
Battery negative (-) → 2 |
Motor gear rotates clockwise |
| Battery positive (+) → 2
Battery negative (-) → 1 |
Motor gear rotates counterclockwise |
If the result is not as specified, replace the rear power window regulator motor assembly RH.
| *1 | Motor Gear |
| *a | Component without harness connected
(Rear Power Window Regulator Motor Assembly RH) |
| *b | Clockwise |
| *c | Counterclockwise |