Home › Vehicle Interior › WINDOW / GLASS › WINDOW DEFOGGER WIRE(for CrewMax)
RM27M0U _58 Vehicle Interior _049161 WINDOW / GLASS _0234472 WINDOW DEFOGGER WIRE(for CrewMax) A

WINDOW / GLASS  WINDOW DEFOGGER WIRE(for CrewMax)  REPAIR  


PROCEDURE

Hide 68131 1.REPAIR DEFOGGER WIRE

U130082E03
2.771,1.115 2.771,1.406 false 0.979,0.885 0.583,0.885 0.583,0.885 0.583,1.573 false 0.969,1.292 0.583,1.292 false 1.708,0.979 1.708,0.302 1.708,0.302 2.042,0.302 false 2.083,0.229 2.885,0.406 0.802,0.177 10 false Repair Point 0.135,1.615 1.073,1.792 0.938,0.177 10 false Masking Tape 2.583,1.417 3.115,1.781 0.531,0.365 10 false Broken Wire

a.

Clean the broken wire tips with grease, wax and silicone remover.


b.

Place masking tape along both sides of the wire.


c.

Thoroughly mix the repair agent.

DuPont paste:

No. 4817 or equivalent



d.
U130083E03
1.333,0.354 1.719,0.354 false 1.417,0.958 0.5,0.958 0.5,0.958 0.5,1.396 false 0.417,0.26 1.354,0.458 0.938,0.198 10 false Fine Tip Brush 0.146,1.427 0.938,1.625 0.792,0.198 10 false Repair Point

Using a fine tip brush, apply a small amount of the agent to the wire.


e.

After a few minutes, remove the masking tape.

NOTICE:

Do not repair the defogger wire again for at least 24 hours.