Home › Vehicle Interior › EXTERIOR › FRONT BUMPER
RM27M0U _58 Vehicle Interior _049164 EXTERIOR _0234487 FRONT BUMPER A

EXTERIOR  FRONT BUMPER  REMOVAL  


PROCEDURE

Hide 53101 1.REMOVE RADIATOR GRILLE SUB-ASSEMBLY

Hide 53932B 2.REMOVE FRONT END PANEL LH

B354979E01
1.738,0.433 2.024,0.681 0.286,0.248 10 *1 1.474,0.818 1.474,0.527 1.474,0.527 1.74,0.527 false

a.

Put protective tape around the front end panel LH.

Text in Illustration
*1 Protective Tape


b.

Remove the 2 screws and 2 clips.


c.

Detach the 3 claws and remove the front end panel LH.


Hide 53931B 3.REMOVE FRONT END PANEL RH

HINT:

Use the same procedure described for the LH side.


Hide 4.REMOVE FRONT BUMPER COVER

a.
B412235

for Steel Type Bumper:

i.

Remove the 2 screws.

HINT:

Use the same procedure for the RH and LH sides.




b.
B354982

for Resin Type Bumper:

i.

Remove the 2 screws.

HINT:

Use the same procedure for the RH and LH sides.




c.
B354984E02
3.25,1.167 3.25,1.667 false 2.969,1.208 2.875,1.677 false 2.729,1.26 2.875,1.677 false 0.135,1.656 0.135,1.792 false 0.333,1.698 0.406,1.875 0.406,1.875 0.49,1.677 false 2.604,1.292 2.604,1.813 false 0.625,1.615 0.625,1.969 0.625,1.969 0.865,1.969 false 1.073,1.521 1.073,1.802 1.073,1.802 2.177,1.802 false 1.531,1.406 1.531,1.802 false 1.979,1.354 1.979,1.802 false 3.135,1.688 3.344,1.896 0.208,0.208 10 true *1 0.865,1.865 1.073,2.073 0.208,0.208 10 true *1 0.052,1.781 0.26,1.99 0.208,0.208 10 false *1 2.177,1.698 2.448,1.906 0.271,0.208 10 true *2 2.521,1.813 2.729,2.021 0.208,0.208 10 true *1 2.781,1.719 2.99,1.927 0.208,0.208 10 true *3 0.333,1.875 0.542,2.083 0.208,0.208 10 true *3

Remove the 4 bolts.

Text in Illustration
*1 Screw A
*2 Screw B
*3 Bolt


d.

Remove the 4 screws labeled A and 3 screws labeled B.


e.
B354985E02
0.469,0.823 0.479,1.271 0.479,1.271 0.615,0.948 false 1.823,1.604 1.719,1.979 1.719,1.979 2.052,1.635 false 0.375,1.292 0.594,1.49 0.219,0.198 10 false *A 1.563,1.958 1.781,2.156 0.219,0.198 10 false *A

Remove the 4 bolts.

Text in Illustration
*A w/ Intuitive Parking Assist System


f.

w/ Fog Light:

i.

Disconnect the fog light connectors and remove the front bumper cover.



g.

w/ Intuitive Parking Assist System:

i.

Detach the 4 clamps and disconnect the wire harness.


ii.

Disconnect the ultrasonic sensor connectors and remove the front bumper cover.



Hide 53883F 5.REMOVE FRONT FENDER MAIN SEAL LH

a.
B354986

Remove the front fender main seal LH.


Hide 53882H 6.REMOVE FRONT FENDER MAIN SEAL RH

HINT:

Use the same procedure described for the LH side.


Hide 52142B 7.REMOVE FRONT BUMPER ARM LH

a.
B354989

Detach the clamp and disconnect the engine room wire.


b.

Remove the 3 nuts and front bumper arm LH.


Hide 52141C 8.REMOVE FRONT BUMPER ARM RH

HINT:

Use the same procedure described for the LH side.


Hide 52131A 9.REMOVE FRONT BUMPER REINFORCEMENT

a.
B380139

Remove the 6 nuts and front bumper reinforcement.


Hide 52026B 10.REMOVE FRONT BUMPER NO. 2 EXTENSION SUB-ASSEMBLY LH

B354991

a.

Remove the 4 nuts and front bumper No. 2 extension sub-assembly LH.


Hide 52025B 11.REMOVE FRONT BUMPER NO. 2 EXTENSION SUB-ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.


Hide 52116G 12.REMOVE FRONT BUMPER SIDE SUPPORT LH

B354987E02
2.573,0.104 2.958,0.333 0.385,0.229 10 false 90°

a.

Remove the screw.


b.

Using a screwdriver, turn the clip 90° and remove the clip.


c.

Detach the clip and remove the front bumper side support LH.


Hide 52115A 13.REMOVE FRONT BUMPER SIDE SUPPORT RH

HINT:

Use the same procedure described for the LH side.


Hide 52521 14.REMOVE FRONT BUMPER CENTER UPPER RETAINER

a.
B354981

Remove the 6 nuts and front bumper center upper retainer.


Hide 52538 15.REMOVE FRONT BUMPER END RETAINER LH

B354988

a.

Remove the 3 nuts and front bumper end retainer LH.


Hide 52537 16.REMOVE FRONT BUMPER END RETAINER RH

HINT:

Use the same procedure described for the LH side.