53852H
1.INSTALL FRONT WHEEL OPENING EXTENSION PAD LH
for Resin Type Bumper:
Install the front wheel opening extension pad LH with the 5 screws.
Install the clip.
for Steel Type Bumper:
Install the front wheel opening extension pad LH with the 3 screws.
Install the clip.
Install the 2 pin hold clips.
53876A
2.INSTALL FRONT FENDER LINER LH
Install the front fender liner LH with 13 new grommets.
Install the 4 screws and clip.
53851K
3.INSTALL FRONT WHEEL OPENING EXTENSION PAD RH
for Resin Type Bumper:
Install the front wheel opening extension pad RH with the 5 screws.
Install the clip.
for Steel Type Bumper:
Install the front wheel opening extension pad RH with the 3 screws.
Install the clip.
Install the 2 pin hold clips.
53875A
4.INSTALL FRONT FENDER LINER RH
Install the front fender liner RH with 13 new grommets.
Install the 4 screws and clip.
76622D
5.INSTALL FRONT FENDER MUDGUARD LH (w/ Mudguard)
76621D
6.INSTALL FRONT FENDER MUDGUARD RH (w/ Mudguard)
Use the same procedure described for the LH side.
7.INSTALL SIDE STEP ASSEMBLY LH (w/ Side Step)
8.INSTALL SIDE STEP ASSEMBLY RH (w/ Side Step)
Use the same procedure described for the LH side.