1.REMOVE SIDE STEP ASSEMBLY LH (w/ Side Step)
2.REMOVE SIDE STEP ASSEMBLY RH (w/ Side Step)
Use the same procedure described for the LH side.
76622D
3.REMOVE FRONT FENDER MUDGUARD LH (w/ Mudguard)
76621D
4.REMOVE FRONT FENDER MUDGUARD RH (w/ Mudguard)
Use the same procedure described for the LH side.
53876A
5.REMOVE FRONT FENDER LINER LH
Remove the 4 screws and clip.
Remove the 13 grommets and front fender liner LH.
53852H
6.REMOVE FRONT WHEEL OPENING EXTENSION PAD LH
for Resin Type Bumper:
Remove the clip.
Remove the 5 screws and front wheel opening extension pad LH.
for Steel Type Bumper:
Using a screwdriver, remove the 2 pin hold clips.
Remove the clip.
Remove the 3 screws and front wheel opening extension pad LH.
53875A
7.REMOVE FRONT FENDER LINER RH
Remove the 4 screws and clip.
Remove the 13 grommets and front fender liner RH.
53851K
8.REMOVE FRONT WHEEL OPENING EXTENSION PAD RH
for Resin Type Bumper:
Remove the clip.
Remove the 5 screws and front wheel opening extension pad RH.
for Steel Type Bumper:
Using a screwdriver, remove the 2 pin hold clips.
Remove the clip.
Remove the 3 screws and front wheel opening extension pad RH.