Use the same procedures for the RH side and LH side.
The procedures listed below are for the LH side.
68210C
1.INSTALL FRONT OUTER DOOR GLASS WEATHERSTRIP ASSEMBLY LH
Attach the claw to install the weatherstrip.
67488F
2.INSTALL FRONT REAR DOOR GUIDE BRACKET GARNISH LH
Clean the radiator front door surface.
Using a heat light, heat the front door surface.
Remove the double-sided tape from the front door.
Wipe off any tape adhesive residue with cleaner.
If reusing the garnish:
Clean the garnish.
Remove the double-sided tape from the garnish.
Wipe off any tape adhesive residue with cleaner.
Apply new double-sided tape to the garnish, as shown in the illustration.
Install the garnish.
Remove the peeling paper from the face of the garnish.
After removing the peeling paper, keep the exposed adhesive free from foreign matter.
Attach the 2 claws in the order shown in the illustration to install the garnish.
Press the garnish firmly to install it.
87940
3.INSTALL OUTER REAR VIEW MIRROR ASSEMBLY LH
67602
4.INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH
74222A
5.INSTALL FRONT DOOR ARMREST COVER LH
67492A
6.INSTALL FRONT LOWER DOOR FRAME BRACKET GARNISH LH
69260
7.INSTALL FRONT DOOR WINDOW REGULATOR HANDLE ASSEMBLY (w/o Power Window)
74232
8.INSTALL FRONT UPPER ARMREST BASE PANEL LH (w/ Power Window)
69284C
9.INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG LH