CUSTOMIZING FUNCTION WITH TECHSTREAM
The following items can be customized.
When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
Connect the Techstream to the DLC3.
Turn the ignition switch ON.
Turn the tester on.
Enter the following menus:
Select: Customize Setting.
Select the setting by referring to the table below.
| Display (Item) | Default | Contents | Setting |
|---|---|---|---|
| Door Key Related Open | ON | Function to manually open sliding roof linked with power window if holding driver side door key for 3 seconds or more to unlock position when ignition switch is off | ON / OFF |
| Door Key Related Close | ON | Function to manually close sliding roof linked with power window if holding driver side door key for 3 seconds or more to lock position when ignition switch is off | ON / OFF |
| Door Key Related Operation | SLIDE | Function to select tilt up or slide open of manual sliding roof operation linked with power window activated by holding driver side door key for 3 seconds or more to unlock position when ignition switch is off | TILT / SLIDE |