Home › Engine / Hybrid System › 3UR-FBE ENGINE MECHANICAL › CYLINDER HEAD › from 2016.08
RM27M0U _51 Engine / Hybrid System _049105 3UR-FBE ENGINE MECHANICAL _0234012 CYLINDER HEAD A

3UR-FBE ENGINE MECHANICAL  CYLINDER HEAD  DISASSEMBLY  


PROCEDURE

Hide 13711 1.REMOVE INTAKE VALVE

a.
A366791E01
2.917,0.323 3.01,0.323 false 0.438,0.656 0.563,0.656 0.563,0.656 0.667,0.844 true 0.094,0.573 0.448,0.771 0.354,0.198 10 false SST 3.063,0.229 3.417,0.427 0.354,0.198 10 true SST

Using SST and wooden blocks, compress the compression spring and remove the valve spring retainer locks.

SST
09202-70020  (09202-01010, 09202-01020)
09202-00021  


b.

Remove the retainer, compression spring and valve.

HINT:

Arrange the removed parts in the correct order.



Hide 13715 2.REMOVE EXHAUST VALVE

a.
A366792E01
0.417,0.271 0.542,0.271 false 2.99,1.698 2.885,1.698 2.885,1.698 2.792,1.594 true 0.104,0.188 0.438,0.396 0.333,0.208 10 false SST 3.031,1.615 3.365,1.823 0.333,0.208 10 false SST

Using SST and wooden blocks, compress the compression spring and remove the valve spring retainer locks.

SST
09202-70020  (09202-01010, 09202-01020)
09202-00021  


b.

Remove the retainer, compression spring and valve.

HINT:

Arrange the removed parts in the correct order.



Hide 13711A 3.REMOVE VALVE STEM OIL SEAL

a.
A164328

Using needle-nose pliers, remove the oil seals.


Hide 13734 4.REMOVE VALVE SPRING SEAT

a.
A164329

Using compressed air and a magnet hand, remove the valve spring seat by blowing air onto it.


Hide 11117E 5.REMOVE NO. 1 STRAIGHT SCREW PLUG

NOTICE:

If water leaks from the No. 1 screw plug or the plug is corroded, replace it.


a.
A145550E03
0.077,2.27 0.342,2.452 0.265,0.181 10 LH: 0.077,0 0.388,0.174 0.311,0.174 10 RH:

Using a 10 mm hexagon wrench, remove the 6 screw plugs and 6 gaskets.


Hide 11117F 6.REMOVE NO. 2 STRAIGHT SCREW PLUG

a.
A164330E01
0.064,0.065 0.358,0.276 0.295,0.211 10 RH: 0.064,2.402 0.352,2.572 0.288,0.170 10 LH:

Using a 14 mm hexagon wrench, remove the 2 screw plugs and 2 gaskets.

NOTICE:

If water leaks from the No. 2 screw plug or the plug is corroded, replace it.



Hide 7.REMOVE STUD BOLT

NOTICE:

If the stud bolt is deformed or its threads are damaged, replace it.