| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | SHIFT PADDLE SWITCH (TRANSMISSION SHIFT SWITCH ASSEMBLY) | - | ( )
|
- | - |
| 2 | STEERING PAD SWITCH ASSEMBLY | 84250A | - | - | - |
| 3 | STEERING WHEEL ASSEMBLY | 45100 | - | - | - |
| *1 | NO. 1 TRANSMISSION SHIFT SWITCH ASSEMBLY | *2 | NO. 2 TRANSMISSION SHIFT SWITCH ASSEMBLY |
| *3 | NO. 1 SWITCH WIRE | - | - |
|
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
| ★ | Precoated part | - | - |
1.INSTALL SHIFT PADDLE SWITCH (TRANSMISSION SHIFT SWITCH ASSEMBLY)
| *a | Guide | *b | Junction |
Connect the No. 1 transmission shift switch assembly connector and No. 2 transmission shift switch assembly connector to install the No. 1 transmission shift switch assembly and No. 2 transmission shift switch assembly to the No. 1 switch wire.
Engage the 4 guides to install the No. 1 switch wire to the steering wheel assembly.
Make sure that the junction of the No. 1 switch wire is to the right of the guide as shown in the illustration.
Engage the 4 claws to install the 2 shift paddle switches (transmission shift switch assemblies) to the steering wheel assembly.
Engage the 2 guides and install the 2 shift paddle switches (transmission shift switch assemblies) to the steering wheel assembly with 2 new screws.
84250A
2.INSTALL STEERING PAD SWITCH ASSEMBLY
45100
3.INSTALL STEERING WHEEL ASSEMBLY